I Go + Travel Powerchair

To fold the chair, first remove the seat cushion, then pull up on the release lever under the seat. The chair will fold in on itself. Always ensure the power is off before folding.

Charge the battery nightly by plugging the charger into the joystick port. A full charge typically takes 6-8 hours. Avoid partial charges to maintain battery life.

Yes, due to its compact folded size, the I Go+ is generally accepted on buses and trains. Always check with local transit authorities for specific regulations.

Locate the adjustment knob under each armrest. Loosen the knob, adjust to the desired height, then retighten. Ensure both armrests are at the same height for comfort.

First, check if the battery is charged. If it is, look for the circuit breaker reset button usually located near the batteries. If pressed, wait a minute before resetting it.

To maximize range, avoid steep inclines when possible, maintain proper tire pressure, and try to keep a consistent speed rather than frequent stops and starts.

While the I Go+ can handle light rain, it's not designed for heavy downpours. If caught in rain, dry the chair thoroughly afterwards, especially the joystick and electrical connections.

Remove the cushion and wipe it with a damp cloth using mild soap and water. Avoid soaking the cushion and ensure it's completely dry before reattaching.

Yes, you can adjust the speed using the speed dial on the joystick control. Turn it towards the tortoise icon for slower speeds and towards the hare for faster speeds.